User Programming (cont’d.)

Handset/ Headset Operation

This feature allow the telephone to operate with a Headset without having to lift the Handset for each telephone call. When in Headset Mode, this feature negates the Speaker phone capability for the telephone. However, the SP-PHONE button is used to answer and hang up the telephone from each call. The SP-PHONE button is essence becomes an button.

To Program Headset Operation:

1. Press the PROGRAM key, and dial 61.
2. Dial 1.
3. Press the ENTER or AUTO DIAL/STORE button to write the value into memory.

 To Program Handset Operation:

1. Press the PROGRAM key, and dial 61.
2. Dial 0.
3. Press the ENTER or AUTO DIAL/STORE button to write the value into memory.
4. Press the EXIT key to return the phone to normal operation.

Auto CO Hunting

This feature allows automatic line selection whenever you lift the handset or press the SP-PHONE button. You may select several types of auto line access. Idle line preference is the most commonly used type of line access.

To Program Auto CO Hunting:

1. Press the PROGRAM key, and dial 19.
2. If your phone has a display, it will show Pref.Out:ICM.
3. Press 0 for NO line preference, 1 for Idle line preference, or 2 for CO- preference, and 3 for INTERCOM.
4. If CO- preference is selected, you must enter the line you wish to automatically access.
5. Press the ENTER or AUTO DIAL/STORE button to write the value into memory.
6.Press the EXIT key to return the phone to normal operation.

9